Mobile Home - Manufactured Housing - RV

1-877-887-3187

Miller Furnaces

Note:

Caution !

There are no returns

on furnace parts.

 

CMF Series

Convertible Furnace

Power Oil-Gas 65,000, 80,000 & 100,000 Btu/h

CMF Series is a classic and time-honored design, a versatile and reliable product incorporating a multi-speed blower and multifired burner. Classic design coupled with new technology make the CMF today's choice for a multi-application fossil fuel heating appliance.

 

* Three-speed, custom fit and painted blower configuration for efficient, quiet operation at all firing rates.

* Titanium kilned process technology used in heat exchanger steel for extended life and durability.

* Re-sized auxiliary limit switch for reliable cycling.

* Beckett oil burners are standard equipment.

* Classic 18" width dimension for those tight replacement jobs.

* MA 100, MA 200, and CB 200 bases for versatility.

Heat Only Furnaces - Standard Flue vent size: 4"

Model #
Burner Type
Btu/h
Input
Btu/h
Output

Wght.
W x D x H
Mfg. #
Part #
Price
CMF2 80PG Gas Gun 80,000
64,000
183
18" x 24-1/4" x 57" 904515 238000
CMF2 80PO Oil Gun 80,000
64,000
167
18" x 24-1/4" x 57" 904516 238001

M1 Series

M1M* Hot Surface Ignition

M1B* Gas Gun

The M1 Series furnace is designed for all sizes of manufactured and modular homes. These units incorporate high efficiency, reliablity, and low maintenance. Units may also be installed free standing in a utility room or enclosed in an alcove or closet. M1 Series furnaces are available in A/C adaptable or A/C ready, with or without coil cavity box, multiple blower combinations for cooling requirements, and many burner options.

 

* Sealed Combustion System: Vents exhaust gas directly outdoors and draws in 100% outside air for the burner.

* Easy Open Pawl Latch: Secures the door firmly for transit, yet allows easy removal for access.

* Choice of Air Conditioning Options: From 2 to 5 tons A/C ready.

* Large, Effective Air Filter: Room air is cleaner with this permanent washable filter.

* High Efficiency Drum Heat Exchanger: Delivers optimum heat transfer with low air resistance.

* Appliance Quality Door: Protects against rust and other corrosion. Baked enamel finish allows for easy cleaning.

* Fully Insulated Cabinet: Insures minnimized heat loss and quiet operation.

* Reliable Burner: With iniform flame pattern extends life of heat exchanger.

Forced Draft Gas

56,000 to 90,000 Btu/h, Heating, A/C Relay (no coil cabinet)

Model No.
Burner Type
Output
Btu/h
AFUE
Wght.
W x D x H
Mfg. #
Part #
Price
M1MB-077AAW Hot Sur. Ign. 62,000
80.0
149
19-3/4" x 23-3/4" x 56" 903230 233015
M1MB-090AAW Hot Sur. Ign. 72,000
80.0
151
19-3/4" x 23-3/4" x 56" 903231 233016

56,000 to 90,000 Btu/h, With Coil Cabinet & A/C Ready up to 3 Tons

Model No.
Burner Type
Output
Btu/h
AFUE
Wght.
W x D x H
Mfg. #
Part #
Price
M1MB-056ABW
Hot Sur. Ign.
46,000
80+
167
19-3/4" x 23-3/4" x 76"
903236
233005
M1MB-070ABW
Hot Sur. Ign.
57,000
80+
168
19-3/4" x 23-3/4" x 76"
903237
233006
M1MB-077ABW
Hot Sur. Ign.
62,000
80+
171
19-3/4" x 23-3/4" x 76"
903238
213099
M1MB-090ABW
Hot Sur. Ign.
72,000
80+
166
19-3/4" x 23-3/4" x 76"
903239
233008

56,000 to 90,000 Btu/h, A/C Ready up to 3 Tons (no coil cabinet)

Model No.
Burner Type
Output
Btu/h
AFUE
Wght.
W x D x H
Mfg. #
Part #
Price
M1MB-056AAW
Hot Sur. Ign.
46,000
80+
152
19-3/4" x 23-3/4" x 56"
903228
233013
M1MB-070AAW
Hot Sur. Ign.
57,000
80+
153
19-3/4" x 23-3/4" x 56"
903229
233014

56,000 to 90,000 Btu/h, With Coil Cabinet & A/C Ready up to 4 Tons

Model No.
Burner Type
Output
Btu/h
AFUE
Wght.
W x D x H
Mfg. #
Part #
Price
M1MC-056ABW
Hot Sur. Ign.
46,000
80
171
19-3/4" x 23-3/4" x 76"
903240
232985
M1MC-070ABW
Hot Sur. Ign.
57,000
80
172
19-3/4" x 23-3/4" x 76"
903241
232986
M1MC-077ABW
Hot Sur. Ign.
62,000
80
171
19-3/4" x 23-3/4" x 76"
903240
232987
M1MC-090ABW
Hot Sur. Ign.
72,000
80
171
19-3/4" x 23-3/4" x 76"
903243
232988

Direct Vent, Gas Gun

66,000 & 86,000 Btu/h, Heating, A/C Relay

Model No.
Burner Type
Btu/h
AFUE
Wght.
W x D x H
Mfg. #
Part #
Price
M1BA-066AAW
Pressure w/Elect Ignition
56,000
82.2
149
19-3/4" x 24" x 56"
903270
233018
M1BB-086AAW*
Pressure w/Elect Ignition
57,000
81.0
150
19-3/4" x 24" x 56"
903255
233019

*A/C ready up to three tons

M4R (C and L Series)

High Efficiency/Direct Vent or Non Direct Vent

Condensing Upflow/Horizontal and Downflow Gas Furnace M4R (C and L Series)

Induced Draft - 92.1 AFUE Input 54,000 - 108,000 Btuh

60,000 & 80,000 Btuh

* 100% fired and tested - all units and each component (both mechanical and electrical) are tested on the manufacturing line.

* Best packaging in the industry - Unique corner post design assures product will arrive to the homeowner dent free.

* 30 second blower delay at start-up assures a warm duct temperature at furnace start-up. Adjustable blower off settings (60, 90, 120 and 180 seconds).

* 30 second post purge increases lif of heat exchanger.

* Hot surface igniter - Innovative application of an appliance type igniter with a 20 year history of reliability. Utilizes proven Smartlite technology.

* Color coded wire harness - Designed to fit the components, all with quick-connect fittings for ease of service and replacement.

* Flexible catagory IV venting system - May be vertically or horizontally vented using either a one-pipe or two-pipe system for maximum flexibility in installation.

* High static Blowers - All models equipped with high static blowers.

* Low Boy Height - Easy to apply in low ceiling applications, works well with taller high SEER coils, easier to handle and install.

* Tubular primary heat exchanger - Heavy gauge aluminized steel heat exchanger and stainless steel secondary heat exchanger assures a long life.

* 90 second fixed cooling cycle blower-off delay (TDR) increases cooling performance when matched with NORDYNE coil.

* High efficiency blower kits maximize efficiencies. On select units, a SEER improvement of up to 1 point is realized.

* Multi-speed direct drive blower - Designed to give a wide range of cooling capacities. Switches on PCB, provide ultra easy motor speed selection.

* LP convertible - Simple burner orifice and regulator spring change for ease of convertibility.

* Diagnostic lights for easy troubleshooting without counting flashes - Dedicated light for flame signal strength and two lights in combination to indicate all other fault codes with easy to recognize states without counting flashes.

* Incorporates integrated control board with connections for electronic air cleaner and humidifier.

* Two piece door design enhances furnace appearance and uses captured screws to prevent losing door screws.

* Sealed vestibule reduces burner and inducer sound levels.

 

90% + Upflow Furnaces

Model No.
Wght.
Mfg. #
Part #
Price
M4RC 054D-24B
120
904747
233141
M4RC 054D-35C 130 904748 233142
M4RC 054D-35C 135 904749 233143
M4RC 054D-46D
155
904750
233144

90% + Downflow Furnaces

Model No.
Wght.
Mfg. #
Part #
Price
M4RL 090D-35C
135
904751
233145

C6 Cased Coil Wrappers

Model No.

Mfg. #
Part #
Price
C6 B
Wrapper, Cased Coil
904759
233146
C6 C Wrapper, Cased Coil 904761 233147
C6 D Wrapper, Cased Coil 904763 233148

M5 Series

M5S* Oil Gun

 

The M5 Series furnace is designed for all sizes of manufactured and modular homes. These units incorporate high efficiency, reliablity, and low maintenance. Units may also be installed free standing in a utility room or enclosed in an alcove or closet. M5 Series furnaces are available in A/C adaptable or A/C ready, with or without coil cavity box, multiple blower combinations for cooling requirements, and many burner options.

 

* Sealed Combustion System: Vents exhaust gas directly outdoors and draws in 100% outside air for the burner.

* Easy Open Pawl Latch: Secures the door firmly for transit, yet allows easy removal for access.

* High Efficiency Drum Heat Exchanger: Delivers optimum heat transfer with low air resistance.

* Fully Insulated Cabinet: Insures minnimized heat loss and quiet operation.

* Reliable Burner: With iniform flame pattern extends life of heat exchanger.

 

Model No.
Otuput
MBtu/h
Wght.
A Cabinet
Wght.
B Cabinet
Mfg. #
Part #
Price
M5SB-066-AAW
56
151
165
921212
233024
M5SB-086-AAW 73 158 173 921209 233025
M5SB-066-ABW 56 151 165 921211 233026
M5SB-086-ABW
73
158
173
921208
233027

UltraFlex E3EB

E3EB-xxx-H Series

Downflow, Upflow Electric Furnaces

 

The E3 Series furnace is designed for all sizes of manufactured and modular homes. These units incorporate high efficiency, reliablity, and low maintenance. Units may also be installed free standing in a utility room or enclosed in an alcove or closet. E3 Series furnaces are available in A/C adaptable or A/C ready, with multiple blower combinations for cooling requirements.

 

* Choice of Air Conditioning options From 2 to 5 tons A/C ready.

* Easy Open Door secures the door firmly for transit, yet allows easy removal for access.

* Effective Air Filter Universal disposable filter is reayily available and simple to replace.

* Nichrome Heating Elements provide long lasting, efficient heating.

* Appliance Quality Door protects against rust and other corrosion. Baked enamel finish allows for easy cleaning.

* Fully Insulated Cabinet: Insures minnimized heat loss and quiet operation.

* Safety and Dependablitiy: Auto reset controls protect unit's electrical circuitry and help ensures trouble free performance. Built in circuit breakers for extra safety.

* Adaptable: Unit can be adapted to provide dependable heating in either downflow or upflow mode.

* Versatile: Works with self-contained or split system air conditioners or heat pumps.

* Dimensions: 20" wide, 29" high, 24.5" deep.

 

Model No.
Output
Heat Btuh

Mfg. #
Part #
Price
E3EB-010H
35,000
904129
238089
E3EB-015HBR 35,000 904154 238090
E3EB-012H 41,000 904130 238091
E3EB-015H
53.000
904131
238092
E3EB-017H 57.000 904132 238093
E3EB-020H 70.000 904133 238094
E3EB-023H 75.000 904134 238095

Ask Us

FOLLOW:

PRICES SUBJECT TO CHANGE WITHOUT NOTICE.

©Copyright 2013 - Mobile Home Depot, Inc. - All Rights Reserved