 |
 |
|
 |
| HEAT TAPE (FROSTEX) |
|
HEAT TAPE (EASYHEAT) |
For plastic and metal water pipes. Water
resistant
cable jacket. Maximum cable length to 50 feet.
Easy
to install. (See Instructions)
|
|
For plastic and metal water pipes. Water
resistant
cable jacket. Maximum cable length to 75 feet.
Easy to
install. (See Instructions) |
Heat Tape - Frostex (Per foot)
Heat Tape - Frostex (100' roll)
Heat Tape - Frostex (250' roll)
Heat Tape - Frostex (500' roll) |
200000
200001
200002
200003 |
$ 1.59
$159.00
$398.00
$795.00 |
|
Heat Tape - Easyheat (100' roll)
Heat Tape - Easyheat (300' roll)
Heat Tape - Easyheat (500' roll) |
200004
200005
200006 |
$171.78
$513.87
$857.10 |
| |
|
 |
|
 |
|
HEAT TAPE PLUG / END KIT
(EASYHEAT) |
HEAT TAPE PLUG/END KIT
(FROSTEX) |
|
30" Power cord compatible with all grounded
outlets.
Built-in ground-fault protection and signal light.
UL
and
factory approved.(See Instructions)
|
|
|
Grounded 30" cord-set. Power indicator light
shows
that power gets to the plug and indicates an
intact
fuse.UL system listed. Built-in fast- reaction fuse.
Now supports up to 75' of freeze free cable.
(See Instructions)
|
| Plug Kit - End (3 watt) |
200008 |
$14.00 |
|
| |
|
|
Plug Kit - End (pkgd)
Plug Kit - End (bag)
End Caps - (5/bag) |
200009
200010
200011 |
$15.81
$12.91
$11.42 |
 |
|
 |
PIPE INSULATION - FOAM
(SELF SEALING) |
|
PIPE INSULATION - FOAM |
|
For copper tubing, PVC tubing and iron pipe.
Semi-
slit to slide on or snap on for fast installation. 6 foot
length
piece.
|
Peel off tape. Closed cell low density
polyethylene.
Pre-slit self-adhesive. Charcoal color. Density
2# +/-
10%.
6 foot length piece.
|
|
|
3/8" Wall Thickness
Insulation - (5/8" ID)
Insulation - (3/4" ID)
Insulation - (7/8" ID)
Insulation - (1-1/8" ID)
|
200024
200025
200026
200027 |
$ 1.41
$ 1.52
$ 1.58
$ 1.84 |
3/8" Wall Thickness
Insulation - (5/8" ID)(fits 1/2"c -
3/8"
IP)
Insulation - (7/8" ID)(fits 3/4"c -
1/2"
IP)
Insulation - (1-1/8" ID)(fits 1"c -
3/4"
IP)
1/2" Wall Thickness
Insulation - (5/8" ID)(fits 1/2"c -
3/8"
IP)
Insulation - (7/8" ID)(fits 3/4"c -
1/2"
IP)
Insulation - (1-1/8" ID)(fits 1"c -
3/4"
IP)
Insulation - (5/8" ID)(fits 1/2"c -
3/8"
IP)
Insulation - (1-5/8" ID)(fits
1-1/2"c
-
1-1/4"
IP)
Insulation - (2-1/8" ID)(fits
2 "c -
1-1/2" IP)
|
200015
200016
200017
200018
200019
200020
200021
200022
200023 |
$ 1.92
$ 2.24
$ 2.64
$ 3.04
$ 3.18
$ 3.84
$ 3.84
$ 4.00
$ 4.56
|
|
|
 |
 |
|
THERMOSTATICALLY CONTROLLED
DEVICE (EASYHEAT) |
|
Power indicator light. Turns on at 38 deg/F, -off
at
50 deg/F. 125 Volts, 15 amps. For dry locations
only.
|
|
Thermostat - Heat Tape |
200028 |
$20.38 |
|
|
|
 |
 |
|
 |
|
| SELF SEALING ELBOW JOINT INSULATION |
|
SELF SEALING TEE JOINT INSULATION |
Peel off tape. Closed cell low density polyethylene.
Pre-slit self adhesive.
|
|
Peel off tape. Closed cell low density polyethylene.
Pre-slit self adhesive.
|
Insulation - Elbow joint (1/2" OD)
Insulation - Elbow joint (3/4" OD)
|
200054
200055 |
$ 2.10
$ 2.14 |
|
Insulation - Tee joint (1/2" OD)
Insulation - Tee joint (3/4" OD)
|
200056
200057 |
$ 2.90
$ 3.04 |
 |
|
 |
PIPE INSULATION & OUTER WRAP
(Includes plastic outer wrap) |
|
PIPE WRAP INSULATION TAPE |
|
Self adhesive foil and foam tape. Insulates hot
and
cold
pipes.
|
Insulation - Fiberglass (3" x 1/2"
x 25')
(Frost King)
Insulation - Fiberglass (3" x 1/2"
x 25')(Camco)
Insulation - Fiberglass (3" x 35')
(Camco)
|
200012
200013
200014 |
$ 3.04
$ 3.66
$ |
|
|
Tape - Pipe wrap (2" x 1/8" x 15')
|
200029 |
$ 4.94 |
 |
|
 |
| RUBBER PIPE INSULATION TAPE |
|
INSULATION TAPE |
| Stopes sweating and dripping on cold pipes. Cuts wasteful heat loss on hot water pipes. Simple one-step installation. |
|
Adheres to all metals. Can be used on hot or cold pipes. Fits well around valves and fittings. |
|
Tape - Cork
Tape - Foam |
471015
471016 |
$10.18
$ 7.87 |
| Tape - Insulation (2" x 30') |
471078 |
$11.76 |
|
 |
|
 |
| ANTI-FREEZE - Easy Going (CAMCO) |
|
ANTI-FREEZE - Artic Ban (CAMCO) |
Protects to -50F (-46C) • Safe • Odorless • Tasteless
• No mixing required • Non-Toxic • Propylene Glycol
base • Safe for fresh water systems • High grade
antifreeze for complete freeze protection
requirements • All ingredients are listed in the U.S.
Federal Register (GRAS) |
|
A blend of Ethyl Alcohol, Glycol, Denaturants,
Colorant and Water used for -50 burst protection in
potable water systems. • No mixing required • Non-
Toxic • Safe for fresh water systems • All ingredients
are listed in the U.S. Federal Register (GRAS)
|
Anti-Freeze - Easy Going |
200030 |
$ 4.13 |
|
Anti-Freeze - Artic Ban |
200030 |
$ 3.68 |
 |
 |
|
 |
| BLOW OUT PLUG |
|
ANTI-FREEZE HAND PUMP |
To remove water from lines, screw into water
intake
fitting and apply air pressure.
|
|
Pumps antifreeze directly into water lines and
supply
tanks. Includes flexible connecting line with city
water connection.
|
Plug - Plastic
Plug - Brass
|
200032
200033 |
$ 2.36
$ 5.37
|
|
|
Hand pump - Plastic (w/flexible
connecting
line) |
36003 |
$17.49 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
