1-248-887-3187

Weekdays 9AM - 5PM EST

Mobile Home - Manufactured Housing - RV

×
Home / RV Index / RV Cargo
TIRE CARRIERS (Stromberg Carlson)
These Rigid and Folding Tire Carriers by Stromberg are designed for your tire carrying needs. Our models are universal in design, suited to carry 15″ – 16″ travel trailer tires on your 4″ square bumper. All hardware and U-bolts are included.
 
Carrier - Rigid tire TR-1 740081 $43.51
Carrier - Folding tire TR-2 740080 $47.21
ADJUSTABLE ACCESSORY HITCH
(Stromberg Carlson)
The CC-300 Adjustable Accessory Hitch provides the following: 2” Hitch for Travel Trailers and Fifth Wheels. Bolts on as Class I or welds on as Class II hitch to frame. Can mount to side wall of frame or horizontal wall of “C” channel or “I” Beam with angled hardware. For use with bike racks, cargo carriers and other accessories. Not to be used pulling cars or boats if bolted in Class 1 Configuration.
 
Hitch - Adjustable accessory CC-300 740225 $195.79
LP BOTTLE RACK  (Stromberg Carlson)
This Bottle Rack by Stromberg is designed to safely hold your 20 lb LP tanks. Wall mounting. Steel design. 20lb tank capacity. Interior or exterior mount.
 
Rack - Single LP tank 2020-JR 171225 $32.97
BIKE BUNK  (Stromberg Carlson)
A raised receiver on the “A” frame is the perfect place to put your bikes. The Bike Bunk by Stromberg allows any RV approved bike rack designed for a 2″ receiver to fit. Your application will be determined by the turning radius and positioning of the rack. All steel design supports up to 100 lbs. Critical Dimensions: 33.5″ from the top of your A-frame to the top of the Bike Bunk cross tube, 29” from the top of your A-frame to the bottom of the receiver tube on the cross tube. Due to the bent design on the vertical posts, lower pockets can be mounted on your A-frame at widths varying from 14″ to 55″. Max A-frame bar height of 6″. If you have propane tanks installed and the bike bunk cross bar is located above them, one of three things can be done to allow you to remove your tanks for refill or to access valves without removing the cross tube. Replace your existing cover with a soft vinyl cover, allowing access to your LP valves or to remove LP tanks without having to remove the cross bar. Replace your existing cover with a flip-top hard plastic cover to access your LP valves. You will need to remove the cross bar to remove cover and refill LP tanks. Leave the tank cover off for direct access to your LP tanks. If you have an Airstream, please note the clearance does not accommodate the 30 gal covered LP tanks. Bike rack not included. See our Post Mount and Platform Mount Bike Racks.
 
Bunk - Trailer tounge Bike CC-275 741202 $249.84
PLATFORM MOUNT BIKE RACK
(Stromberg Carlson)
The Stromberg Carlson BC-202BA 2-bike platform mount carrier can be used on Motorhomes, Travel Trailers and Fifth Wheels. Two bike carrier. Fits 4” bumpers or 2″ receivers. Bumper Accessory Hitch Included. Wheel Mounts Adjust to Any Size Frame. Weight Capacity 80 lbs.
 
Rack - 2-Bike platform mount BC-202BA 760823 $272.78
PLATFORM MOUNT BIKE RACK
(Stromberg Carlson)
The Stromberg Carlson BC-204 4-bike platform mount carrier can be used with 2″ hitch receivers. Four Bike Carrier. Fits 2” Receiver. Vertical Post Tilts Down for Access to Vehicle. Wheel Mounts Adjust to Any Size Frame. Weight Capacity 160 lbs. Not for bumper or hitch use behind fifth wheel or travel trailer.
 
Rack - 4-Bike platform mount BC-204 760824 $395.20
BUMPER MOUNTED CARGO CARRIER
The Eaz-Lift RV Bumper Mounted Cargo Carrier is perfect for carrying coolers and other cargo on the back of your RV. It mounts to both 4-inch and 4 1/2-inch RV bumpers. The carrier has overall dimensions of 26-inches x 31 ¾-inches x 4-inches with inner dimensions of 24 ½-inches x 30 1/8-inches x 3 3/16-inches. Constructed of durable, powder-coated steel, the carrier weighs 14 lb. All mounting hardware is included.
 
Carrier - Bumper mount cargo 48470 $95.13
BUMPER MOUNT TOTE TANK HOLDER
The Rhino Bumper Mount Tote Tank Holder securely holds your Rhino Tote Tank onto standard RV bumpers and fits both 4-inch and 4-1/2-inch bumpers. It’s perfect for RVs without ladders. The holder is constructed of powder-coated steel with zinc-coated hardware for durability. Holds all four Rhino Tote Tank sizes (15, 21, 28 and 36 gallons) and is also compatible with most portable waste holding tanks on the market. Includes straps to secure your tote tank in place.
 
Holder - Bumper mount tank 39010 $78.00
EAZ-LIFT HITCH ANTI-RATTLE DEVICE
Eaz-Lift's Anti-Rattle Device for Hitches helps prevent hitch movement and noise. This provides a quieter, smoother ride. It is ideal for bike racks, hitch racks, cargo carriers, spare tire mounts, trailer ball mounts and more. The anti-rattle device is compatible with 2-inch shanks and can be used with hitch classes 1, 2, 3 and 4. Product includes (1) wedge plate, (1) U-bolt and (2) flanged lock nuts. The wedge plate is constructed of durable powder-coated steel and the U-bolt is constructed of zinc-plated steel. Measures 4-inches x 4-inches x 4 7/16-inches.
 
Anti-Rattle - Hitch 48469 $13.75
EAZ-LIFT HITCH PIN AND CLIP
The Eaz-Lift Receiver Hitch Pin and Clip securely keeps a receiver hitch-mounted accessory in place while towing. It features a 115-degree bend for easy handling and additional security. Includes a clip to keep the receiver hitch pin securely engaged to the trailer hitch and ball mount. Constructed of durable, zinc-plated carbon steel. 5/8" Dia.
 
Pin - Hitch (4-3/4" Usable L, for 3" Receivers) 48016 $ 5.41
Pin - Hitch (3-7/8" Usable L, for 2-1/2" Receivers) 48017 $ 5.41
MOTORCYCLE WHEEL CHOCK
Motorcycle Wheel Chock with Handlebar Straps keeps your motorcycle secured and upright during transit. It mounts to either your truck bed or trailer floor and includes handle bar straps for extra security. With a universal tire fit, the wheel chock accommodates multiple tire sizes. Measures 11.5-inches x 8.25-inches x 23-inches and is made of durable, powder-coated steel. Includes (1) wheel chock, (2) nylon handle bar straps and all mounting hardware.
 
Chock - Motorcycle wheel 66100 $75.68
RECESSED MOTORCYCLE WHEEL CHOCK
Recessed Motorcycle Wheel Chock helps keep your motorcycle secured upright during transit and is designed for trailers with 16-inch cross member spacing. It accommodates most tire sizes with widths of up to 6.25-inches and is constructed of durable, powder-coated steel. Includes all mounting hardware. Measures 17.5-inches x 9.75-inches x 2-inches deep. Must be used with straps (not included).
 
Chock - Recessed wheel 66101 $64.91
RV ROOF RACK
Use this Roof Rail by Stromberg Carlson to contain cargo and provide tie-down points on top of your RV. 60″ long by 90″ wide, but can be trimmed to fit most any size roof. Constructed of rust resistant 1″ anodized aluminum tubing. Includes seven 4″ tall roof stanchions for even rail support. 75 lb maximum weight capacity.
 
Rack - RV Roof LA-500 500235 $63.63
LADDER BIKE RACK HOLDER
(Stromberg Carlson)
This ladder mount Bike Rack by Stromberg attaches to your RV ladder (1″ round tubing) and is secured to ensure a no-rattle rack. Once installed, pins can be pulled to easily give you access up and down your ladder. Our bike rack carries two bikes and will get them to your destination safe and secure. Made from aluminum to match the no rust finish of your RV ladder. Length from bend to tip of extended bike arms is 13″, max distance between bike cradles is 9″. Weight capacity of bike rack carrier is 50lbs. Please note: ladder mounting bracketry is silver, not black as shown in assembly photo.
 
Rack - Two bike LA-102 741201 $81.63
TRAILER TRAY
(STROMBERG CARLSON)
The first trailer tongue cargo carrying system! Adjustable to fit most “A” frame trailers on the road today; this tray provides additional storage in the softest riding area of your trailer. Your application will be determined by tow vehicle turning radius and positioning of the tray. Supports up to 300 lbs. Use it for generators, coolers, compressors, welders, wood boxes and much more! Appx. 30-5/8” from top of A-frame to top of tray. Appx. 29-1/2” from top of A-frame to bottom of tray. This distance is designed to accommodate up to a 30 lb standard LP tank. Due to bent design on vertical tubes, tray brackets can be mounted on your A-frame at widths varying from 14″ to 55″ (Note: you may need to modify the front support plate to accommodate increased width mounting). Also see Gen Secure Storage Box.

Please note, if you have propane tanks installed at the intended tray location, one of three things can be done to allow you to remove your tanks for refill or to access valves without removing the tray.

• Replace your existing cover with a soft vinyl cover,
  allowing access to your LP valves or to remove LP
  tanks without having to remove the cross bar.
• Replace your existing cover with a flip-top hard plastic
  cover to access your LP valves. You will need to
  remove the cross bar to remove cover and refill LP
  tanks.
• Leave the tank cover off for direct access to your LP
  tanks.
 
Tray - Trailer CC-255 $
ULTRA CARGO CARRIER
(Ultra-Fab)
500 lbs. capacity. Rugged steel construction. Powder coated for years of durability. 19.25" x 60" metal mesh platform eliminates standing water. Convenient tie-down utility holes. Fits 2" receiver hitch. Weighs just 36 lbs.
 
Carrier - Cargo (19.25" x 60") 730005 $127.22
Carrier - Cargo (23.25" x 60") 730006 $148.15